The primary Hang-AR components are machined aluminum and finished using an antiqued blackening process. The mounts come in a version for AR-15 and AR-10. They connect to the corresponding upper receiver via the pivot and takedown pin connectors where the upper and lower are connected while in use. The mount can be hung on any Hang-AR Mounting Peg, which offers flexible hanging options to the consumer.

Locking Pin

Each Mount requires 2 locking pins. These pins are threaded to securely screw into the mount once it’s on the upper receiver to minimize any risk of an upper receiver coming out of a Mount unintendedly.

Mounting Peg

The Mounting Peg is the portion of the Hang-AR that is secured to whatever surface the consumer wishes to hang their upper on. The main Hang-AR product comes with a standard hardware screw and drywall anchor rated for up to 75lbs for the mounting peg to be installed in a wall that can accept screws. The screw goes through the center of the Mounting Peg to secure it to the wall. The consumer will have to use their best judgement if they are installing to a surface where a different screw option should be considered.

Assembled basic hang-AR

Each Hang-AR can hang one upper at a time. Consumers with multiple uppers can hang multiple Hang-Ars side by side, as long as they are spaced a minimum of 3” from one another and do not exceed the individual weight ratings for the screws/anchors being used.

Mag Mount

The Mag Mount (magnetic mount) is sold separately. This option allows the Mounting Peg to be used on the side of a safe or other magnetic surface. This expands the hanging options for the consumer and allows uppers to be moved from wall display areas to safe sides and back again whenever the consumer desires.

Slat Mount

The Slat Mount is sold separately. It was designed with the retailer and gunsmith in mind as it can be easily inserted into any standard slat wall and allow uppers to be hung vertically for more attractive and space-saving displays.


Main AR upper mount assembly when installed to an upper receiver.


Aesir Enterprises LLC

10530 72nd Street, Ste 705

Seminole, FL 33777

Tel: 727-544-0626